Product description The GelBottle Builder In A Bottle Spirited (BIAB™):

Want to buy The GelBottle BIAB™? Want to buy Builder In A Bottle™? Want to buy Builder In A Bottle™ Spirited? Want to buy The Gelbottle BIAB™ Spirited? Looking for a Builder In A Bottle™ from The GelBottle? The GelBottle Builder In A Bottle™, abbreviated BIAB™ or Builder Gel in a bottle, is a great collection of soak off builder gels. The GelBottle BIAB™ Spirited is a beautiful soft pink ballerina color with a little hint of peach color. TGB BIAB™ is a builder gel that is very unique in nature, with BIAB™ you can strengthen natural nails, you can repair split nails or damaged nails and is very ideal for extending nails with stencils and/or extension with tips. What makes this product from The GelBottle absolutely great is the addition of primer and base in one bottle, so you no longer have to purchase expensive products. This 2-in-1 formula helps you complete your manicure or pedicure treatment in a much faster time! These builder gels from The GelBottle do not chip or lift and help the natural nails grow, even after a number of treatments a slight c-curve appears. The 2021 BIAB™ colors of The GelBottle are very diverse, from beautiful builder in a bottle nude to red and lilac Builder In A Bottle™ shades. You can apply the Builder In A Bottle™ building gel after using a layer of Klear Velvet Scrub, after applying BIAB™ you can also paint the BIAB™ nails with a GelBottle gel polish color and seal with, for example, the high-gloss GelBottle Extreme Shine Top Coat. Builder In A Bottle™ comes in a unique white 20 ml bottle with brush. This allows you to place approximately 25 to 65 sets, depending on the nail and the nail extension used. You can also work much more hygienically with the bottle and brush combination than from a jar, as dirt simply cannot get into the gel. In short, quality and quantity in a unique and beautiful 20 ml bottle! In addition to many unique features, the BIAB™ also contains an innovative feature, this builder gel can be soaked off, soak off BIAB™ nails with Klear The Fast And Soakable within 10 to 12 minutes. Use nail foils or a manicure bowl for this.

Features and Benefits of The GelBottle Builder In A Bottle Spirited (BIAB™):

• The GelBottle Builder In A Bottle Spirited (BIAB™)
• The GelBottle BIAB™ Spirited
• The GelBottle BIAB™ Spirited has a soft pink ballerina color with a hint of peach color
• Strengthen natural nails with BIAB™
• With BIAB™, naturally repair nails after multiple treatments, for example split nails
• Extend nails with BIAB™ by using templates or nail tips
• BIAB™ Ambitious is a unique base and primer soak off builder gel
• BIAB™ can be completely soaked with Klear The Fast And Soakable
• GelBottle BIAB™ can also be used as a base coat
• BIAB™ can be applied immediately after the prep and a layer of Klear Velvet Scrub
• The GelBottle BIAB's are a very unique primer and base in one bottle!
• BIAB™ is packaged in a striking white bottle with brush for easy and quick application
• Builder In A Bottle™ is more hygienic than working from a gel jar
• Builder In A Bottle™ is a 100% Gel system
• BIAB™ will not tear, chip or lift
• BIAB™ remains in place for at least 4 weeks
• About 25 to 65 sets, depending on the nail and extension used
• Contents 20 ml
• Official GelBottle nail wholesaler
• Nail wholesaler Rotterdam
• By Fay located in Rotterdam

How to use The GelBottle Builder In A Bottle Spirited (BIAB™):

TGB BIAB™ NATURAL NAIL TREATMENT

Step #1: Nail Prep

• Clean your and your customer's hands with Klear Sanifiner
• Use a cuticle pusher and possibly a pair of cuticle pliers to push back and/or remove cuticles
• File the nails into shape with The GelBottle 220/240 Natural Nail File
• Gently buff the nails with The GelBottle 100/180 Nail Buffer until all shine has been removed.
• Clean, degrease and temporarily remove moisture from the nail with Klear Velvet Scrub

Step #2: First Coat of GelBottle BIAB™

• Apply an even base coat of The GelBottle Clear Rubber Base if you are working with TGB BIAB™ WHITE or TGB BIAB™ CLEAR. If you are working with one of the natural BIAB™ shades, you can start with a thin layer of BIAB™ on the natural nail.
• After applying the first thin layer of BIAB™, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds. We do not recommend the use of other lamps! If your customer experiences heat spikes, remove their hand from the LED lamp and switch to low-heat mode and remember to make up for lost seconds with the LED lamp.

Step #3: Second Coat of GelBottle BIAB™

• Apply a small scoop of The GelBottle BIAB™, spreading from side to side and dragging away from the cuticle. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one nail at a time, turning hand to assist in creating APEX if needed.
• After applying the second layer of BIAB™, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds. We do not recommend the use of other lamps!

Step #4: Third Coat of GelBottle BIAB™

• Apply a medium scoop with The GelBottle BIAB™, spreading from side to side and dragging away from the cuticle. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one nail at a time, turning hand to assist in creating APEX if needed.
• After applying the second layer of BIAB™, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds. We do not recommend the use of other lamps!

Step #5: Refine The BIAB™ Nails

• Refine the BIAB™ nails with a GelBottle 120/180 Nail File, use the soft side (grit 180), in this way you make the BIAB™ nails even tighter and more beautiful.
• Remove dust with a manicure dust brush

Step #6: Top Coat For BIAB™

• For a natural color finish, apply a coat of The GelBottle Extreme Shine Top Coat. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• If you want to paint all BIAB™ nails with a GelBottle gel polish color, follow the three steps below:

STEP #1: Apply First Coat of Gel Polish Over BIAB™ Nails

• Apply a thin layer of TGB gel polish, making sure to seal the free edge well.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #2: Apply Second Coat of Gel Polish Over BIAB™ Nails

• Apply an even second coat of TGB gel polish, making sure to seal the free edge well as well. Pay attention to the degree of coverage, it may differ with the level of pigmentation per color, whether you paint the BIAB™ nails once or twice.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #3: Top Coat For TGB Gel Polish Color

• Apply a coat of The GelBottle Extreme Shine Top Coat, The GelBottle Matte Top Coat or The GelBottle Rubber Top Coat and also seal the free edge. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the desired TGB top coat, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to cure all TGB products. We do not recommend the use of other lamps!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File

TGB BIAB™ NAIL EXTENTIONS USING NAIL TIPS

Step #1: Nail Prep

• Clean your and your customer's hands with Klear Sanifiner
• Use a cuticle pusher and possibly a pair of cuticle pliers to push back and/or remove cuticles
• File the nails into shape with The GelBottle 220/240 Natural Nail File
• Gently buff the nails with The GelBottle 100/180 Nail Buffer until all shine has been removed.
• Clean, degrease and temporarily remove moisture from the nail with Klear Velvet Scrub

STEP #2: Apply tips

• Stick the TGB Clear Tips on the nails with TGB nail glue. Press down firmly to ensure no air bubbles form, air can cause lifting!
• Cut, file and polish the nail tips into shape using a The GelBottle 120/180 Nail File and a GelBottle 100/180 Nail Buffer

STEP #3: Apply base coat

• Apply a thin layer of TGB Nude BIAB™ or a layer of TGB Rubber Base in combination with BIAB™ White or BIAB™ Clear, remembering to include the free edge for sealing.
• After applying the base coat, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.

STEP #4: Apply Second Coat

• Apply a small scoop of The GelBottle BIAB™, spreading from side to side and dragging away from the cuticle. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one nail at a time, turning hand to assist in creating APEX if needed.
• After applying the second layer of BIAB™, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds. We do not recommend the use of other lamps!

STEP #5: Apply Third Coat

• Apply a small scoop of The GelBottle BIAB™, spreading from side to side and dragging away from the cuticle. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one nail at a time, turning hand to assist in creating APEX if needed.
• After applying the second layer of BIAB™, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds. We do not recommend the use of other lamps!

STEP #6: Apply Top Coat or Gel Polish

• Remove the adhesive layer with a cellulose swab and UV Cleanser
• File the surface and free edge to refine the shape of the nail with the GelBottle 120/180 Nail File
• Polish the nails smooth with the nail extension with the GelBottle 100/180 Nail Buffer
• For a high gloss finish, apply a coat of The GelBottle Extreme Shine Top Coat, matte finish with the TGB Matte Top Coat. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• If you want to paint all BIAB™ nails with a GelBottle gel polish color, follow the three steps below:

STEP #1: Apply First Coat of Gel Polish Over BIAB™ Nails

• Apply a thin layer of TGB gel polish, making sure to seal the free edge well.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #2: Apply Second Coat of Gel Polish Over BIAB™ Nails

• Apply an even second coat of TGB gel polish, making sure to seal the free edge well as well. Pay attention to the degree of coverage, it may differ with the level of pigmentation per color, whether you paint the BIAB™ nails once or twice.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #3: Top Coat For TGB Gel Polish Color

• Apply a coat of The GelBottle Extreme Shine Top Coat, The GelBottle Matte Top Coat or The GelBottle Rubber Top Coat and also seal the free edge. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the desired TGB top coat, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to cure all TGB products. We do not recommend the use of other lamps!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File

SCULPTING WITH TGB BIAB™ AND TGB NAIL FORMS

Step #1: Nail Prep

• Clean your and your customer's hands with Klear Sanifiner
• Use a cuticle pusher and possibly a pair of cuticle pliers to push back and/or remove cuticles
• File the nails into shape with The GelBottle 220/240 Natural Nail File
• Gently buff the nails with The GelBottle 100/180 Nail Buffer until all shine has been removed.
• Clean, degrease and temporarily remove moisture from the nail with Klear Velvet Scrub

STEP #2: Applying GelBottle Templates

• Apply the TGB Nail Forms to each nail to adjust the nail curve.
• Make sure that there are no gaps between the nail templates and the nails.

STEP #3: Apply base coat

• Apply a thin layer of TGB Nude BIAB™ or a layer of TGB Rubber Base in combination with BIAB™ White or BIAB™ Clear, remembering to include the free edge for sealing. When applying, start from the free edge of the natural nail and gently drag down the stencil to create a good base for a nail extension.
• After applying the base coat over the stencil, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.
• Repeat step #3 for each nail one at a time.

STEP #4: First Coat

• Apply a medium scoop of The GelBottle Nude BIAB™, do this by spreading from side to side and dragging away from the cuticle to the tip of the stencil you have created. Avoid a thick build-up around the free edge and cuticle.
• After applying the first layer over the stencil, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.
• Remove the nail template.

STEP #5: Second Coat

• Apply a medium scoop of The GelBottle Nude BIAB™, do this by spreading from side to side and dragging away from the cuticle to the tip of the stencil you have created. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one BIAB™ nail at a time, turning the hand to assist in creating APEX if necessary.
• After applying the first layer over the stencil, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.

STEP #6: Third Layer

• Apply a medium scoop of The GelBottle Nude BIAB™, do this by spreading from side to side and dragging away from the cuticle to the tip of the stencil you have created. Avoid a thick build-up around the free edge and cuticle.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact
• Builds and cures one BIAB™ nail at a time, turning the hand to assist in creating APEX if necessary.
• After applying the first layer over the stencil, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.

STEP #7: Refine the nails

• Remove the adhesive layer with a cellulose swab and UV Cleanser
• Refine the nails by refining the surface of the extended BIAB™ nails with the GelBottle 120/180 Nail File
• File the desired shape of the extended BIAB™ nails with the GelBottle 120/180 Nail File
• Polish the nails smooth with the nail extension with the GelBottle 100/180 Nail Buffer

STEP #8: Apply Top Coat over extended BIAB™ nails

• For a natural color finish, apply a coat of The GelBottle Extreme Shine Top Coat. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• If you want to paint all extended BIAB™ nails with a GelBottle gel polish color, follow the three steps below:

STEP #1: Apply First Gel Polish Coat Over Extended BIAB™ Nails

• Apply a thin layer of TGB gel polish, making sure to seal the free edge well.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #2: Apply Second Coat of Gel Polish Over Extended BIAB™ Nails

• Apply an even second coat of TGB gel polish, making sure to seal the free edge well as well. Pay attention to the degree of coverage, it may differ with the level of pigmentation per color, whether you paint the BIAB™ nails once or twice.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #3: Top Coat For TGB Gel Polish Color

• Apply a coat of The GelBottle Extreme Shine Top Coat, The GelBottle Matte Top Coat or The GelBottle Rubber Top Coat and also seal the free edge. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the desired TGB top coat, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to cure all TGB products. We do not recommend the use of other lamps!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File

REBALANCE TGB BIAB™ NAILS

Step #1: Remove Top Coat And/Or Gel Polish

• Disinfect your and your customer's hands with Klear Sanifiner
• File using the TGB E-File (provided you are trained with an electric file) or otherwise with a GelBottle 120/180 Nail File. File open the GelBottle Extreme Top Coat and remove any TGB gel polish until the BIAB™ is exposed. Level the BIAB™ growth area well.
• Remove dust with a manicure brush and clean, degrease and temporarily remove moisture from the nail with Klear Velvet Scrub

STEP #2: Nail Prep

• Use a cuticle pusher and possibly a pair of cuticle pliers to push back and/or remove cuticles.
• Ensure that any lifting of BIAB™ is removed using a GelBottle 120/180 Nail File
• Use a GelBottle 120/180 Nail File to smooth the surface of the remaining BIAB™ and reduce the length if necessary.
• Dehydrate and cleanse the area of ​​natural nail growth with Klear Velvet Scrub.

STEP #3: Fill With BIAB™

• Apply a medium to thick layer of The GelBottle BIAB™ and spread the BIAB™ around in circular motions, dragging away from the cuticle. Be careful to avoid thick build-up around the free edge and cuticles. Turn the hand to help create APEX if needed.
• Seal the free edge, this is an important feature, this protects the BIAB™ nails against impact.
• Build and fill the BIAB™ nails one at a time
• After filling the grown BIAB™ nail, cure one by one for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.

STEP #4: Top Coat

• For a high gloss finish, apply a coat of The GelBottle Extreme Shine Top Coat, matte finish with the TGB Matte Top Coat. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the GelBottle Extreme Shine Top Coat, cure for 60 seconds in The GelBottle LED Lamp or in the low-heat function for 99 seconds if the customer experiences heat spikes! If the customer experiences heat formation that feels unpleasant, switch to the 99 second mode (low heat mode) and do not forget to make up for the lost seconds in this low heat mode. We do not recommend the use of other lamps! The TGB Light The Way LED Lamp is specially designed to harden TGB products.
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File
• If you want to paint all filled BIAB™ nails with a GelBottle gel polish color, follow the three steps below:

STEP #1: Apply First Gel Polish Coat Over Extended BIAB™ Nails

• Apply a thin layer of TGB gel polish, making sure to seal the free edge well.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #2: Apply Second Coat of Gel Polish Over Extended BIAB™ Nails

• Apply an even second coat of TGB gel polish, making sure to seal the free edge well as well. Pay attention to the degree of coverage, it may differ with the level of pigmentation per color, whether you paint the BIAB™ nails once or twice.
• After applying the first layer of TGB gel polish, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to harden all TGB products. We do not recommend the use of other lamps!

STEP #3: Top Coat For TGB Gel Polish Color

• Apply a coat of The GelBottle Extreme Shine Top Coat, The GelBottle Matte Top Coat or The GelBottle Rubber Top Coat and also seal the free edge. It is not necessary to remove or clean the adhesive layer after curing. All TGB top coats are no-wipe!
• After applying the desired TGB top coat, cure for 60 seconds in The GelBottle LED Lamp, this TGB LED Lamp is specially designed to cure all TGB products. We do not recommend the use of other lamps!
• After the Top Coat has hardened, file the free edge with the 180 grit for a smooth finish with a GelBottle 120/180 grit Nail File

Zo breng je TGB BIAB™ aan: stap voor stap
Stap 1: Nagelvoorbereiding
* Desinfecteer je handen en die van je klant.
* Duw de nagelriemen terug met een cuticle pusher en knip het overtollige deel af met een nagelriemschaar. Optioneel: gebruik een freesmachine met vlam bitje om dode huid te verwijderen.
* Vijl de nagels in de gewenste vorm met een BY FAY 120/180 vijl.
* Polijst de nagels voorzichtig met een TGB 100/180 buffer om de glans te verwijderen. Dit kan ook met een freesmachine en mandrel freesbit.
* Ontvet en reinig de nagelplaat met Klear Velvet Scrub of Klear Aceton.
Stap 2: Eerste laag
* Breng een dunne laag Rubber Base of Bond Base aan op de voorbereide natuurlijke nagel.
* Hard de basecoat 99 seconden uit op de lage warmtestand van de TGB-lamp.
Behandel je een klant met een bevestigde HEMA-allergie? Gebruik dan een volledig HEMA-vrij systeem: Bond Base, Glow Top en ons HEMA-vrije gelassortiment.
Stap 3: Tweede laag
* Breng een middelgrote laag TGB BIAB™ aan. Verdeel de laag van links naar rechts en trek hem weg van de nagelriem. Vermijd een dikke laag rond de vrije nagelrand.
* Bouw de laag op en hard één nagel tegelijk uit. Draai de hand om de apex te creëren.
* Hard de nagel 99 seconden uit.
Stap 4: Derde laag (optioneel)
* Breng een tweede middelgrote laag TGB BIAB™ aan op dezelfde wijze als stap 3.
* Hard de nagel 99 seconden uit.
Stap 5: Verfijnen
* Verwijder de plakkerige laag met Klear Don't Be Tacky.
* Verfijn de nagel met een BY FAY 120/180 vijl.
* Polijst de nagel in vorm met een TGB 100/180 buffer. Concentreer je op het verminderen van product rond de nagelriem en de vrije nagelrand.
* Verwijder stof met het stofborsteltje en veeg de nagel af met Klear Velvet Scrub of Klear Isopropanol.
Stap 6: Topcoat
* Wil je de nagels afwerken met TGB Gel Colour? Volg dan de stappen voor het aanbrengen van TGB Gel Polish.
* Breng de door jou gekozen TGB Top Coat aan en hard 60 seconden uit.
* Breng een kleine hoeveelheid StraDerm Nail & Cuticle Treatment of TGB Cuticle Essence aan op elke nagelriem. Vermijd contact met de nagel om dofheid van de topcoat te voorkomen.

BIAB™ verwijderen: stap voor stap
Stap 1: Voorbereiding
* Desinfecteer je handen en die van je klant.
Stap 2: Topcoat verwijderen
* Verwijder de topcoat met een 120/180 vijl of met een freesmachine met de BY FAY Cylindrical Safety Bit Medium.
Stap 3: Inweken
* Week de TGB Removal Foil in Klear The Fast and Soakable en wikkel deze strak om elke nagel.
* Laat 10 tot 15 minuten weken. De exacte weektijd is afhankelijk van de dikte van het resterende product.
Stap 4: Gel verwijderen
* Verwijder de folie van één nagel tegelijk, terwijl de andere nagels gewikkeld blijven.
* Gebruik het duwgedeelte van een bokkepootje om de gel voorzichtig los te schuiven. Forceer de gel er niet af.
* Zit de gel nog vast? Wikkel de nagel opnieuw in en laat nog 5 tot 10 minuten weken. Herhaal indien nodig.
* Verwijder eventuele resten met het duwgedeelte van de TGB ProPrep tool.
* Ondersteun de vrije nagelrand van de klant met je vinger tijdens het verwijderen om buigen of breken van de nagel te voorkomen.
Stap 5: Polijsten en verzorgen
* Het volledige product kan ook worden verwijderd met een freesmachine en de BY FAY Cylindrical Safety Bit Medium, zonder dat inweken nodig is. Werk voorzichtig en systematisch, van de vrije nagelrand richting de nagelriem, en zorg dat je de natuurlijke nagel te allen tijde ontziet.
* Blijft er na het frezen nog een dunne laag basecoat of BIAB™ achter? Polijst deze voorzichtig weg met een TGB 100/180 buffer. Concentreer je op de gebieden rond de nagelriemen en voorkom overmatig polijsten van de natuurlijke nagel.
* Breng na het verwijderen van alle productresten een ruime hoeveelheid StraDerm Nail & Cuticle Treatment of TGB Cuticle Essence aan.

The Gel Bottle BIAB™ — de originele Builder in a Bottle
BIAB™ van The Gel Bottle Inc. is de originele builder-in-a-bottle gelformule, ontwikkeld voor professionele nagelstylisten. De 6-in-1 formule combineert primer, basecoat, versterker, builder en kleur in één product. Aanbrengen. Toppen. Klaar.
Productkenmerken
* 6-in-1 formule die primer, basecoat, versterker, builder én kleur in één stap vervangt
* Zelfnivellerend voor een gladde, vlekkeloze afwerking die eenvoudig bij te werken of te verwijderen is
* Sterke overlays als duurzame nagelextensie of beschermende laag voor natuurlijke nagelgroei
* Tot 5 weken draagtijd zonder afbladderen of loslaten
* 60+ tinten voor elk seizoen en elke stijl
* Compatibel met LED én UV voor totale flexibiliteit in de salon
* Inhoud: 20 ml, goed voor circa 75 sets
If it's not TGB, it's not BIAB™