Accept no imitations, there is nothing else like The GelBottle Clear BIAB™. This TGB Builder In A Bottle Clear is a must-have for every nail tech's collection! TGB BIAB™
Clear has a transparent finish for a classic and minimalist look. You can use The GelBottle Builder In A Bottle Clear to build up the natural nail or for a BIAB™
gel nail extension.
PLEASE NOTE: The GelBottle BIAB™
Clear requires a very thin coat of The GelBottle Clear Rubber Base Coat. This TGB BIAB™ Clear contains less primer to prevent yellowing.
This file-off formula is the best BIAB™
for clients who need extra strength or length for their builder gel manicure. The TGB BIAB™
Clear file-off builder gel is ideal for creating strong nail overlays and is used as a strengthening barrier for natural nails.
Promote natural nail growth with this chip-free, no-lift formula from The GelBottle. This BIAB™
Clear is recommended for infills, and when you want to remove it, it should only be filed off with the TGB E-File (if you are E-File trained) or by hand.
Remember, if it’s not TGB, it’s not BIAB™!
How to apply TGB Hard BIAB™: step-by-step
Step 1: Nail preparation
* Disinfect your hands and your client's hands.
* Push back the cuticles with a cuticle pusher and trim any excess with cuticle nippers. Optional: use an e-file with a flame bit to remove dead skin.
* File the nails into the desired shape with a BY FAY 120/180 file.
* Gently buff the nails with a TGB 100/180 buffer to remove shine. This can also be done with an e-file and mandrel bit.
* Degrease and clean the nail plate with Klear Velvet Scrub or Klear Acetone.
Step 2: First coat
* Apply a thin layer of Rubber Base or Bond Base to the prepared natural nail.
* Cure the basecoat for 99 seconds on the low heat setting of the TGB lamp.
Step 3: Second coat
* Apply a medium-sized layer of TGB BIAB™. Distribute the layer from left to right and pull it away from the cuticle. Avoid a thick layer around the free edge.
* Build up the layer and cure one nail at a time. Turn the hand to create the apex.
* Cure the nail for 99 seconds.
Step 5: Refine
* Remove the tacky layer with Klear Don't Be Tacky.
* Refine the nail with a BY FAY 120/180 file.
* Buff the nail into shape with a TGB 100/180 buffer. Concentrate on reducing product around the cuticle and the free edge.
* Remove dust with a dust brush and wipe the nail with Klear Velvet Scrub or Klear Isopropanol.
Step 6: Topcoat
* Do you want to finish the nails with TGB Gel Colour? Then follow the steps for applying TGB Gel Polish.
* Apply your chosen TGB Top Coat and cure for 60 seconds.
* Apply a small amount of StraDerm Nail & Cuticle Treatment or TGB Cuticle Essence to each cuticle. Avoid contact with the nail to prevent dullness of the topcoat.
Removing Hard BIAB™ with an e-file: step-by-step
Step 1: Preparation
* Disinfect your hands and your client's hands.
Step 2: Remove topcoat
* Remove the topcoat with an e-file using the BY FAY Cylindrical Safety Bit Medium.
Step 3: Remove product
* Remove the entire product with the e-file and the BY FAY Cylindrical Safety Bit Medium. Work carefully and systematically from the free edge towards the cuticle, protecting the natural nail at all times.
Step 4: Buff and care
* If a thin layer of basecoat or BIAB™ remains after filing, gently buff it away with a TGB 100/180 buffer. Concentrate on the areas around the cuticles and avoid over-buffing the natural nail.
* After removing all product residue, apply a generous amount of StraDerm Nail & Cuticle Treatment or TGB Cuticle Essence.
* Built-in base coat for an efficient workflow
* File-off system for easy removal with a file
* Wear time of 4 weeks or longer
* Thicker viscosity, suitable for nail extensions
* 100% gel formula, compatible with both LED and UV lamps
* Flawless, smooth finish
* TPO-free and HEMA-free for safe use with sensitive clients
BIS-HEA POLY(1,4-BUTANEDIOL)-9/IPDI COPOLYMER, HYDROXYPROPYL METHACRYLATE, BIS-(PENTAERYTHRITYL TRIACRYLATE) PENTAERYTHRITYL DIACRYLATE/IPDI COPOLYMER, PENTAERYTHRITYL TETRAACRYLATE, SILICA, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, BIS-PEG/PPG-18/6 DIMETHICONE, PENTAERYTHRITYL TRIACRYLATE [MAY CONTAIN: (+/-) TITANIUM DIOXIDE (CI 77891), FD&C YELLOW NO. 6 (CI 15985), FD&C YELLOW NO. 5 (CI 19140), FD&C BLUE NO. 1 (CI 42090), D&C RED NO. 33 (CI 17200), D&C RED NO.6 (CI 15850), D&C RED NO. 7 (CI 15850), IRON OXIDES (CI 77491, CI 77499)]
The GelBottle Builder In A Bottle Clear Hard BIAB™
- Unit price
- / per
Shop now, Pay later. Read more
Unopened and unused orders can be returned within 14 days without giving a reason.
The costs for returning the product are for your own account.
Sale items, hygiene items
By Fay Giftcards, store purchases cannot be returned online.
Ordered today, shipped the same day. You can place your order via PostNL on weekdays until 4:00 PM, and we will ship your order the same day. If you order after 4:00 PM on Friday, we will ship your order on Monday.
We ship orders via PostNL for €6.95 (excl. VAT) per order.
Adding product to your cart
Accept no imitations, there is nothing else like The GelBottle Clear BIAB™. This TGB Builder In A Bottle Clear is a must-have for every nail tech's collection! TGB BIAB™
Clear has a transparent finish for a classic and minimalist look. You can use The GelBottle Builder In A Bottle Clear to build up the natural nail or for a BIAB™
gel nail extension.
PLEASE NOTE: The GelBottle BIAB™
Clear requires a very thin coat of The GelBottle Clear Rubber Base Coat. This TGB BIAB™ Clear contains less primer to prevent yellowing.
This file-off formula is the best BIAB™
for clients who need extra strength or length for their builder gel manicure. The TGB BIAB™
Clear file-off builder gel is ideal for creating strong nail overlays and is used as a strengthening barrier for natural nails.
Promote natural nail growth with this chip-free, no-lift formula from The GelBottle. This BIAB™
Clear is recommended for infills, and when you want to remove it, it should only be filed off with the TGB E-File (if you are E-File trained) or by hand.
Remember, if it’s not TGB, it’s not BIAB™!
How to apply TGB Hard BIAB™: step-by-step
Step 1: Nail preparation
* Disinfect your hands and your client's hands.
* Push back the cuticles with a cuticle pusher and trim any excess with cuticle nippers. Optional: use an e-file with a flame bit to remove dead skin.
* File the nails into the desired shape with a BY FAY 120/180 file.
* Gently buff the nails with a TGB 100/180 buffer to remove shine. This can also be done with an e-file and mandrel bit.
* Degrease and clean the nail plate with Klear Velvet Scrub or Klear Acetone.
Step 2: First coat
* Apply a thin layer of Rubber Base or Bond Base to the prepared natural nail.
* Cure the basecoat for 99 seconds on the low heat setting of the TGB lamp.
Step 3: Second coat
* Apply a medium-sized layer of TGB BIAB™. Distribute the layer from left to right and pull it away from the cuticle. Avoid a thick layer around the free edge.
* Build up the layer and cure one nail at a time. Turn the hand to create the apex.
* Cure the nail for 99 seconds.
Step 5: Refine
* Remove the tacky layer with Klear Don't Be Tacky.
* Refine the nail with a BY FAY 120/180 file.
* Buff the nail into shape with a TGB 100/180 buffer. Concentrate on reducing product around the cuticle and the free edge.
* Remove dust with a dust brush and wipe the nail with Klear Velvet Scrub or Klear Isopropanol.
Step 6: Topcoat
* Do you want to finish the nails with TGB Gel Colour? Then follow the steps for applying TGB Gel Polish.
* Apply your chosen TGB Top Coat and cure for 60 seconds.
* Apply a small amount of StraDerm Nail & Cuticle Treatment or TGB Cuticle Essence to each cuticle. Avoid contact with the nail to prevent dullness of the topcoat.
Removing Hard BIAB™ with an e-file: step-by-step
Step 1: Preparation
* Disinfect your hands and your client's hands.
Step 2: Remove topcoat
* Remove the topcoat with an e-file using the BY FAY Cylindrical Safety Bit Medium.
Step 3: Remove product
* Remove the entire product with the e-file and the BY FAY Cylindrical Safety Bit Medium. Work carefully and systematically from the free edge towards the cuticle, protecting the natural nail at all times.
Step 4: Buff and care
* If a thin layer of basecoat or BIAB™ remains after filing, gently buff it away with a TGB 100/180 buffer. Concentrate on the areas around the cuticles and avoid over-buffing the natural nail.
* After removing all product residue, apply a generous amount of StraDerm Nail & Cuticle Treatment or TGB Cuticle Essence.
* Built-in base coat for an efficient workflow
* File-off system for easy removal with a file
* Wear time of 4 weeks or longer
* Thicker viscosity, suitable for nail extensions
* 100% gel formula, compatible with both LED and UV lamps
* Flawless, smooth finish
* TPO-free and HEMA-free for safe use with sensitive clients
BIS-HEA POLY(1,4-BUTANEDIOL)-9/IPDI COPOLYMER, HYDROXYPROPYL METHACRYLATE, BIS-(PENTAERYTHRITYL TRIACRYLATE) PENTAERYTHRITYL DIACRYLATE/IPDI COPOLYMER, PENTAERYTHRITYL TETRAACRYLATE, SILICA, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, BIS-PEG/PPG-18/6 DIMETHICONE, PENTAERYTHRITYL TRIACRYLATE [MAY CONTAIN: (+/-) TITANIUM DIOXIDE (CI 77891), FD&C YELLOW NO. 6 (CI 15985), FD&C YELLOW NO. 5 (CI 19140), FD&C BLUE NO. 1 (CI 42090), D&C RED NO. 33 (CI 17200), D&C RED NO.6 (CI 15850), D&C RED NO. 7 (CI 15850), IRON OXIDES (CI 77491, CI 77499)]